Engineering, 17.02.2020 21:20 brazilmade1
You are working as a flight-test engineer at the NASA Dryden Research Center. During the low-speed phase of the test program for the X-37, you know that the plane is flying at an altitude of 8 km. The pressure at station 1 is 1550 N/m^2 , gage; the pressure at station 2 is -3875 N/m^2 , gage.
a. If gage 1 is known to be at the stagnation point, what is the velocity of the airplane?
b. What is its Mach number?
c. What is the free-stream dynamic pressure for this test condition?
d. What is the velocity of the air at the edge of the boundary layer at the second point relative to the airplane? What is the velocity relative to the ground? What is the Cp for this gage?
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
You know the right answer?
You are working as a flight-test engineer at the NASA Dryden Research Center. During the low-speed p...
Questions
Mathematics, 04.09.2020 05:01
Mathematics, 04.09.2020 05:01
Mathematics, 04.09.2020 05:01
Mathematics, 04.09.2020 05:01
Mathematics, 04.09.2020 05:01
English, 04.09.2020 05:01
Mathematics, 04.09.2020 05:01
Mathematics, 04.09.2020 05:01
