subject
Engineering, 19.02.2020 01:51 ann6083

Consider a wall that consists of two layers, A and B, with the following values: a. kA = 0.7 W/m.ºC, b. LA = 6 cm, c. kB = 0.25 W/m.ºC, d. LB = 3 cm. If the temperature drop across the wall is 21ºC, what is the rate of heat transfer through the wall per unit area of the wall?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
question
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
question
Engineering, 04.07.2019 19:20
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
question
Engineering, 06.07.2019 05:10
An electric cable of 10 mm in diameter is to laid in atmosphere at 20°c. the estimated surface temperature of the cable due to heat generation is 65°c. find out ther maximum percentage, increese in heat dissipated when the wire is insulated with rubber having k =0155 w/m-k. take h=8.5w/m^2.k
Answers: 2
You know the right answer?
Consider a wall that consists of two layers, A and B, with the following values: a. kA = 0.7 W/m.ºC,...
Questions
Questions on the website: 13722363