Consider a program that performs the following steps repeatedly:
Engineering, 21.02.2020 19:39 wyattmiller
(Operating Systems)
Consider a program that performs the following steps repeatedly:
1. Use the CPU for 2 milliseconds.
2. Issue in I/O to disk for 7 milliseconds.
3. Use the CPU for 5 milliseconds.
4. Issue an I/O to the network for 9 milliseconds.
Assume that each step depends on data obtained from the previous step. Also, assume that it takes 1
millisecond to execute the device driver code for both the disk and the network at the beginning of the I/O.
Answer the following questions:
(a) Draw a time-line diagram that illustrates the utilizations of the CPU, disk, and network over the execution of two iterations of the program above.
(b) What are the utilizations of the CPU, disk and network over these two iterations?
(c & d) Assume that there are two processes of the program above running concurrently, answer parts (a) and (b) for this case showing which part belong to which process.
Answers: 2
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
(Operating Systems)
Consider a program that performs the following steps repeatedly:
Consider a program that performs the following steps repeatedly:
Mathematics, 28.02.2020 05:16
Mathematics, 28.02.2020 05:16
Mathematics, 28.02.2020 05:16
Mathematics, 28.02.2020 05:16
Chemistry, 28.02.2020 05:17