subject
Engineering, 09.03.2020 17:40 sophiaaacake

A 5-gallon tank used by a refrigerator repair person that initially contains a two-phase mixture of R134a at 20°C develops a small leak at the top. The process is slow enough such that the temperature remains constant at 20°C. If the initial contents are 90% liquid by mass, then determine the heat transfer (kJ) that occurred over the time it took for all the liquid to disappear in the tank (i. e. final state of saturated vapor at 20°C).

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 19:10
Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg.m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?
Answers: 3
question
Engineering, 04.07.2019 19:20
In the winter, in order to keep the classroom steadily at 68 f before 10 pm, heating with an average rate of 42,000 btu/hr is provided. assume the outdoor temperature maintains at 32°f, determine the electrical power (kw) required to (a) operate a reversible heat pump (b) operate a real heat pump with a cop (7) of 4.5 and (c) operate an electrical-resistance heater.
Answers: 3
question
Engineering, 04.07.2019 19:20
Air at a pressure of 1atm and a temperature of 40 c is in parallel flow over the top surface of a flat plate that is heated to a uniform temperature of 120 c. the plate has a length of 0.40m (in the flow direction) and a width of 0.15m. the reynolds number based on the plate length is 50, 000. what is the rate of heat transfer from the plate to the air? if the free stream velocity of the air is doubled and the pressure is increased to 10 atm what is the rate of heat transfer?
Answers: 2
question
Engineering, 06.07.2019 03:10
List and describe in sequence the operation process steps for boxf machine?
Answers: 1
You know the right answer?
A 5-gallon tank used by a refrigerator repair person that initially contains a two-phase mixture of...
Questions
question
Mathematics, 23.04.2020 01:36
question
Chemistry, 23.04.2020 01:36
question
Mathematics, 23.04.2020 01:36
question
Biology, 23.04.2020 01:36
question
Mathematics, 23.04.2020 01:36
Questions on the website: 13722361