subject
Engineering, 12.03.2020 05:59 expresslmnop

25°C is flowing in a covered irrigation ditch below ground. Every 100 ft, there is a vent line with a 1.0 in. inside diameter and it is 1.0 ft long to the outside atmosphere at 25°C. There are 10 vents in the 1000-ft ditch. The outside air can be assumed to be dry. Calculate the total evaporation loss of water in lbm/d. Assume that the partial

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
question
Engineering, 06.07.2019 02:30
Around steel bar, made from material with a yield stress of 750mpa, is loaded so that it has stresses co locations of maximum normal stress and maximum shear stress. use maximum shear stress and maximum distortion energy theories to calculate the safety factors for initial yielding failures.
Answers: 3
You know the right answer?
25°C is flowing in a covered irrigation ditch below ground. Every 100 ft, there is a vent line with...
Questions
question
Geography, 19.09.2019 17:30
question
History, 19.09.2019 17:30
Questions on the website: 13722367