Engineering, 19.03.2020 22:57 ryliepeloquinf

An ideal Otto cycle has a compression ratio of 8. At the beginning of the compression process, air is at 95 kPa and 278C, and 750 kJ/kg of heat is transferred to air during the constant-volume heat-addition process. Taking into account the variation of specific heats with temperature, determine (a) the pressure and temperature at the end of the heat- addition process, (b) the net work output, (c) the thermal efficiency, and (d) the mean effective pressure for the cycle

Answers: 2

Show answers

Answers

Answer from: woodfordmaliky

(a). The value of temperature at the end of heat addition process $T_{3}$ = 2042.56 K

(b). The value of pressure at the end of heat addition process $P_{3}$ = 1555.46 k pa

(c). The thermal efficiency of an Otto cycle $E_{otto}$ = 0.4478

(d). The value of mean effective pressure of the cycle $P_{m}$ = 1506.41 $\frac{k pa}{kg}$

Explanation:

Compression ratio $r_{p}$ = 8

Initial pressure $P_{1}$ = 95 k pa

Initial temperature $T_{1}$ = 278 °c = 551 K

Final pressure $P_{2}$ = 8 × $P_{1}$ = 8 × 95 = 760 k pa

Final temperature $T_{2}$ = $T_{1}$ × $r_{p} ^{\frac{\gamma - 1}{\gamma} }$

Final temperature $T_{2}$ = 551 × $8 ^{\frac{1.4 - 1}{1.4} }$

Final temperature $T_{2}$ = 998 K

Heat transferred at constant volume Q = 750 $\frac{KJ}{kg}$

(a). We know that Heat transferred at constant volume $Q_{S}$ = $m C_{v} ( T_{3} - T_{2} )$

⇒ 1 × 0.718 × ( $T_{3}$ - 998 ) = 750

⇒ $T_{3}$ = 2042.56 K

This is the value of temperature at the end of heat addition process.

Since heat addition is constant volume process. so for that process pressure is directly proportional to the temperature.

⇒ P ∝ T

⇒ $\frac{P_{3} }{P_{2} }$ = $\frac{T_{3} }{T_{2} }$

⇒ $P_{3}$ = $\frac{2042.56}{998}$ × 760

⇒ $P_{3}$ = 1555.46 k pa

This is the value of pressure at the end of heat addition process.

(b). Heat rejected from the cycle $Q_{R} = m C_{v} ( T_{4} - T_{1} )$

For the compression and expansion process,

⇒ $\frac{T_{3} }{T_{2} } = \frac{T_{4} }{T_{1} }$

⇒ $\frac{2042.56}{998} = \frac{T_{4} }{551}$

⇒ $T_{4}$ = 1127.7 K

Heat rejected $Q_{R}$ = 1 × 0.718 × ( 1127.7 - 551)

⇒ $Q_{R}$ = 414.07 $\frac{KJ}{kg}$

Net heat interaction from the cycle $Q_{net}$ = $Q_{S}$ - $Q_{R}$

Put the values of $Q_{S}$ & $Q_{R}$ we get,

⇒ $Q_{net}$ = 750 - 414.07

⇒ $Q_{net}$ = 335.93 $\frac{KJ}{kg}$

We know that for a cyclic process net heat interaction is equal to net work transfer.

⇒ $Q_{net}$ = $W_{net}$

⇒ $W_{net}$ = 335.93 $\frac{KJ}{kg}$

This is the net work output from the cycle.

(c). Thermal efficiency of an Otto cycle is given by

$E_{otto} = 1- \frac{T_{1} }{T_{2} }$

Put the values of $T_{1}$ & $T_{2}$ in the above formula we get,

$E_{otto} = 1- \frac{551 }{998 }$

⇒ $E_{otto}$ = 0.4478

This is the thermal efficiency of an Otto cycle.

(d). Mean effective pressure $P_{m}$ :-

We know that mean effective pressure of the Otto cycle is given by

$P_{m}$ = $\frac{W_{net} }{V_{s} }$ ---------- (1)

where $V_{s}$ is the swept volume.

$V_{s}$ = $V_{1} - V_{2}$ ---------- ( 2 )

From ideal gas equation $P_{1}$ $V_{1}$ = m × R × $T_{1}$

Put all the values in above formula we get,

⇒ 95 × $V_{1}$ = 1 × 0.287 × 551

⇒ $V_{1}$ = 0.6 $m^{3}$

From the same ideal gas equation

$P_{2}$ $V_{2}$ = m × R × $T_{2}$

⇒ 760 × $V_{2}$ = 1 × 0.287 × 998

⇒ $V_{2}$ = 0.377 $m^{3}$

Thus swept volume $V_{s}$ = 0.6 - 0.377

⇒ $V_{s}$ = 0.223 $m^{3}$

Thus from equation 1 the mean effective pressure

⇒ $P_{m}$ = $\frac{335.93}{0.223}$

⇒ $P_{m}$ = 1506.41 $\frac{k pa}{kg}$

This is the value of mean effective pressure of the cycle.

Answer from: Quest

Diene d fbfjcnfd ebjjn

Answer from: Quest

answer:

the army does care about its soilders sir i think yout getting off on the wrong foot sir you need to respect our country were keeping the peole that want to d harm towards you out. so dont go saying we don't care cause we do

Another question on Engineering

Engineering, 04.07.2019 18:10

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

Answer

Engineering, 04.07.2019 18:20

The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Prove the equivalence between the two statements of the 2nd law of thermodynamics (i.e., a violation of one statement leads to the violatio the other statement)

Answers: 2

Answer

Engineering, 04.07.2019 19:10

How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?

Answers: 2

Answer

You know the right answer?

An ideal Otto cycle has a compression ratio of 8. At the beginning of the compression process, air i...

Questions

Engineering, 23.03.2021 20:50

PLEASE HEL ASA 1) Explain why the scenario below fails to clearly identify customer needs. A design company is asked to build a toddler p...