Engineering, 20.03.2020 12:44 MileenaKitana
This could represent the dynamics of an Industrial Remote Inspection System, which is essentially a remote-controlled robot for high radiation fields. Our goal is to design a proper compensator C(s). (a) (7 points) Design a compensator C(s) such that the gain crossover frequency become ωg = 10 rad/sec, and a minimum phase margin of 35 degrees is achieved (Note: tan−1 (10) = 84.3 ◦ , and tan−1 (3.33) = 73.3 ◦ And don’t forget to account for, say, 5◦ additional margin so once you modify your compensator in the next part, you would still meet your minimum phase margin of 35◦ ). (b) (1 point) Find the velocity constant Kv for the compensated system you designed in Part (a). What would be the steady-state tracking error of the closed-loop system ess for a ramp input r(t) = tu(t)? (c) (4 points) Now, modify your compensator in order to further reduce the steadystate ramp tracking error to less than 0.001 while still trying to preserve the same gain crossover frequency and the same phase margin as Part (a). (d) (2 points) How would you propose to modify your compensator in Part (a) if, instead of the 0.001 tracking error requirement in Part (c), your objective was actually to completely eliminate the steady-state error in tracking a ramp input?
Answers: 3
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
This could represent the dynamics of an Industrial Remote Inspection System, which is essentially a...
Mathematics, 23.03.2020 18:59
Mathematics, 23.03.2020 18:59
Mathematics, 23.03.2020 18:59
Mathematics, 23.03.2020 18:59
History, 23.03.2020 18:59
Mathematics, 23.03.2020 18:59
Mathematics, 23.03.2020 18:59
English, 23.03.2020 18:59
Mathematics, 23.03.2020 18:59
History, 23.03.2020 18:59