Engineering, 21.03.2020 04:54 Squid1865
(40 points) A thick plate (with a thickness of 10 m) has a thermal conductivity, k = 20 [W/(m·K)] and a thermal diffusivity, = 5.6 ×10-6 [m2/s]. The plate is initially at a uniform temperature of 325 °C. At time, t >0, the surface is exposed to cold liquid at a free steam temperature of 15 °C flowing at a velocity of 10 m/s resulting in a forced convection heat transfer coefficient of 100 [W/(m2·K)].(a) Using a space increment, x = 15 mm, and a time increment, t = 18 seconds, determine temperature at the surface of the plate after 3 minutes have elapsed. Hint: Use the finite-difference method. (20 points)(b) Using a space increment, x = 15 mm, and a time increment, t = 18 seconds, determine temperature at a depth of 45 mm after 3 minutes have elapsed. Hint: Use the finite-difference method. (20 points)(c) Calculate the error in your calculation for the results obtained in part (a) and part (b) compared to the values obtained by using the exact solution (i. e., derived from analytical equation in your text book). (20 points)\
Answers: 2
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
(40 points) A thick plate (with a thickness of 10 m) has a thermal conductivity, k = 20 [W/(m·K)] an...
Computers and Technology, 10.11.2019 02:31
English, 10.11.2019 02:31
Computers and Technology, 10.11.2019 02:31
Computers and Technology, 10.11.2019 02:31