Engineering, 31.03.2020 02:30 Tetto
A slab-milling operation is carried out on a high-strength steel block that has a specific energy of 1.3 hp*min/in3, a length of 20 in, and a width of 6 in, at a feed of 0.01 in/tooth and a depth of cut of 0.15 in. The cutter rotates at 150 rpm and has a diameter of 3 in with 8 straight cutting teeth. Calculate the material removal rate and the cutting time, and estimate the power required.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
Engineering, 06.07.2019 02:30
Around steel bar, made from material with a yield stress of 750mpa, is loaded so that it has stresses co locations of maximum normal stress and maximum shear stress. use maximum shear stress and maximum distortion energy theories to calculate the safety factors for initial yielding failures.
Answers: 3
You know the right answer?
A slab-milling operation is carried out on a high-strength steel block that has a specific energy of...
Questions
Biology, 31.01.2022 20:50
Mathematics, 31.01.2022 20:50
Mathematics, 31.01.2022 20:50
Mathematics, 31.01.2022 20:50
Mathematics, 31.01.2022 21:00
Mathematics, 31.01.2022 21:00
Mathematics, 31.01.2022 21:00
Mathematics, 31.01.2022 21:00
