Engineering, 15.04.2020 21:27 meganenaranjo

Estion 1
t yet
swered
Irked out of
10
The term CNC stands for:
Untitled - Notepad
File Edit Format Help
NO : THIS FILE FOR PLM-1000 MILL
IN USE 3 X 2 X 1.5 MACHINABLE 1
N2 : INITIALIZE STOCK TO X=0, Ya!
N3 ; 11 IS A 1/4 END MILL
IN4 ; T2 IS A 1/8 END MILL
N5 M06 T01 ; Toolchange 1/4 Endi
N6 M08; Contouring Operation, COI
NW M3 1500.00
N8 GO ZO. 0700 : Retract
N9 GO XO. 3000 YO. 2000
Flag
estion
Select one:
a. Commanding Numerical Computer
b. Controlling Numerical Computer
c. Computer Numerical Control
d. Computer Numerical Commands

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

Answer

Engineering, 04.07.2019 19:10

The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object

Answers: 1

Answer

Engineering, 04.07.2019 19:20

At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2

Answers: 2

Answer

You know the right answer?

Estion 1
t yet
swered
Irked out of
10
The term CNC stands for:
U...

Questions