Engineering, 16.04.2020 00:45 daniel1480

A rigid copper tank, initially containing 1 m3 of air at 295 K, 5 bar, is connected by avalve to a large supply line carrying air at 295 K, 15 bar. The valve is opened only as long as required tofill the tank with air to a pressure of 15 ,bar at which point the air in the tank is at 310 .K The copper tank, which has a mass of 20 ,kg is at the same temperature as the air in the tank, both initially and finally. Thespecific heat of the copper is c= =0.38kJ/(kg-KK). You may ignore kinetic and potential energy effects. Assuming ideal gas behavior for the air, determine (a) the initial and final mass of air within the tank and(b)the heat transfer to the surroundings from the tank and its contents, in kJ, ignoring kinetic and potential energy effects.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

Answer

Engineering, 04.07.2019 19:10

What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.

Answers: 1

Answer

You know the right answer?

A rigid copper tank, initially containing 1 m3 of air at 295 K, 5 bar, is connected by avalve to a l...

Questions