subject
Engineering, 16.04.2020 16:45 kifeak2002

Given a straight bar of 1080 steel from the foundry, it was machined into a katana blade. After machining, there are clear signs of warpage and the blade is no longer straight. Whatheat treatment (high level concepts only, no specific times or temperatures needed) wouldyou suggest to

1) reduce the warpage, and
2) maintain hardness of the edge, and
3) maintainsome level of fracture toughness; of the katana blade.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
question
Engineering, 04.07.2019 19:10
What is the main objective of using reheat rankine cycle?
Answers: 3
You know the right answer?
Given a straight bar of 1080 steel from the foundry, it was machined into a katana blade. After mach...
Questions
Questions on the website: 13722359