In order to get a weight reduction, a 15 cm diameter solid steel shaft rotating at 150 rpm. The shaft is 3 meters long and the density of steel is 8.05 g/cm3. This shaft is replaced by a Titanium (p = 4.506 g/cm3) tube with a 15 cm OD and an 10 cm ID. Determine the reduction in kinetic energy in this system.

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?