Engineering, 26.04.2020 01:15 probablyacommunist

A fourth order, Type I, linear phase, FIR filter, h[n], is to be designed using the window method. The ideal impulse response of the filter is defined as: hd[n] = sin([pi/4][n - N/2]) / ([n - N/2]pi) , where N is the filter order and 'pi' denotes the mathematical (irrational) constant number 3.14159 Given that a stopband attenuation of 50 dB is required, a) Find and sketch h[n] b) Determine the transfer function of the resulting digital filter c) Draw the filter block diagram d) Determine whether this filter is stable, justifying your answer.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

Answer

You know the right answer?

A fourth order, Type I, linear phase, FIR filter, h[n], is to be designed using the window method. T...

Questions