Engineering, 05.05.2020 04:38 rutza
The following data was measured in the cross-flow heat exchanger experiment using a single rod. Inlet Air Temperature (C) (Tin and T\infty): 27 Outlet Air Temperature (C): 28Average Inlet Air Velocity (m/s): 10 Heating Element Temperature (C): 550Given: The area of cross section is 0.02286 m2. The diameter and the length of the rod are 0.0125 m and 0.10795 m, respectively. Assume (air): CP = 1007 J/kg-K), Density=1.1614 kg/m3, u=184.6x10-7 (N s/m2 ) Calculate the average h and Nu. Discuss the major error sources.
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
You know the right answer?
The following data was measured in the cross-flow heat exchanger experiment using a single rod. Inle...
Questions
Mathematics, 22.02.2020 05:01
Computers and Technology, 22.02.2020 05:01
Computers and Technology, 22.02.2020 05:02
Health, 22.02.2020 05:02
