Engineering, 07.05.2020 02:12 tryintopassenioryear

A Brayton cycle with regeneration and reheat generates 10 MW of power. Air enters the compressor at 100 kPa and 300 K. The compressor operates with a pressure ratio of 12 and an isentropic efficiency of 80%. The air enters the high pressure turbine stage at 1400 K and exits at a pressure of 350 kPa. The air is reheated to 1400 K before entering the second turbine stage. Each turbine stage has an efficiency of 80%. The regenerator has an effectiveness of 80%. Using an air-standard analysis, determine:

a. The pressure and temperature at each state, in kPa and K,

b. The mass flow rate of air, in kg/s,

c. The heat addition rate in kW,

d. The thermal efficiency of the cycle, and

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

Answer

You know the right answer?

A Brayton cycle with regeneration and reheat generates 10 MW of power. Air enters the compressor at...

Questions