With reference to the vector loop of Section 4.6, the cross and the open configurations of the circuit will produce:1. only different angles for theta 3 andTheta 4 2. should have the same values in both cases 3. different angles for theta 3 and for theta 4 sames angles for theta 3 and for theta 4 4. only different angles for theta Theta 3 should have the same values in both cases

Option 4 =>  only different angles for theta 4, Theta 3 should have the same values in both cases.

Explanation:

The vector loop of Section 4.6 that was made as the reference diagram has the vector loop closing itself and the vectors summing around loop zero. Also, it has one DOF mechanism and the vector length is equal to the vector link.

NOTE: Kindly check the attached file or picture for the diagram of Section 4.6 diagram.

We can see from the diagram below that the V3 and V4 can be determined or Calculated with parameters such as theta 2, all links length and length d.

Therefore, the cross and the open configurations of the circuit will produce from the diagram will be " only different angles for theta 4, Theta 3 should have the same values in both cases."( That is option 4)

answer:

yes that is right have a good day

answer:

true

c

explanation: