subject
Engineering, 20.09.2020 16:01 PerfectMagZ

Liquid ammonia ( = 0.4 cSt, SG = 0.65) is pumped from a vented tank to a large header with four 1 cm nozzles. The piping is 150 m of 4 cm commercial steel pipe, 3 threaded regular elbows, and a globe valve. The nozzles discharge at 25 m above the supply pipe. The valve is fully open. The pump head is essentially constant at 50 m over a wide range of flows. a) Solve for the flow using an initial guess of 1 L/s.
b) Solve for the required pipe diameter and K for the globe valve for a flow of 4 L/s. The pipe is available in 2 cm diameter increments. Put (a) and (b) on separate worksheets labeled 1a, 1b.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 18:20
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
You know the right answer?
Liquid ammonia ( = 0.4 cSt, SG = 0.65) is pumped from a vented tank to a large header with four 1 c...
Questions
question
Chemistry, 04.06.2020 21:02
question
Social Studies, 04.06.2020 21:02
question
Social Studies, 04.06.2020 21:02
question
Mathematics, 04.06.2020 21:02
Questions on the website: 13722362