Engineering, 21.09.2020 14:01 ricardotavarez6
An engineer designs a new bus that can drive 30 miles per gallon of fuel. Which of the following was likely one of the
client's most important criterla?
aesthetics
cost effectiveness
fuel efficiency
reliability
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
An engineer designs a new bus that can drive 30 miles per gallon of fuel. Which of the following was...
Questions
History, 22.10.2020 20:01
Mathematics, 22.10.2020 20:01
Mathematics, 22.10.2020 20:01
Mathematics, 22.10.2020 20:01
Mathematics, 22.10.2020 20:01
Mathematics, 22.10.2020 20:01
Mathematics, 22.10.2020 20:01
Social Studies, 22.10.2020 20:01
Mathematics, 22.10.2020 20:01
Chemistry, 22.10.2020 20:01
Physics, 22.10.2020 20:01
