Engineering, 10.10.2020 14:01 abbypoletick
Exam
3. Your employer has asked you to remove old metal plating from the worksite. The metal plating is
heavy and has sharp edges. What PPE should you use?
Select the best answer(s). There may be more than one
(4 Points)
A respirator
Steel-toed boots
Gloves
Safety glasses
AVAL
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
Engineering, 04.07.2019 18:10
During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
You know the right answer?
Exam
3. Your employer has asked you to remove old metal plating from the worksite. The metal platin...
Questions
Advanced Placement (AP), 13.11.2019 03:31
Advanced Placement (AP), 13.11.2019 03:31
Computers and Technology, 13.11.2019 03:31
