Engineering, 04.11.2020 01:00 joe805

Please help Design Solution #1: Gravity Filter
Strengths for Society and Environment: Holds 13 gallons of water, lasts 3-5 years, does not require electricity, filters out bacteria

Weaknesses for Society and Environment: Heavy and replacement parts cost $25-$100, Costs $390.95

Design Solution #2: Lifestraw
Strengths for Society and Environment: You can drink from something as small as a puddle, filters out bacteria (99.99% of waterborne bacteria)

Weaknesses for Society and Environment: Only lasts 250-330 days, might affect an insect’s environment

Design Solution #1: Gravity Filter
Does it meet the criteria? Explain:
Does it meet the constraints? Explain: Yes, because research shows
that the lifestraw filters out 99.99% of bacteria.

Design Solution #2 Is more useful than Design Solution #1 Because...
*The purification method that will help the most people in the community is...

because...

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.

Answers: 3

Answer

Engineering, 06.07.2019 02:30

On solidification from a melt, the polymer polyethylene forms a semi-crystalline spherulite structure. (i) sketch an individual spherulite and label the amorphous and crystalline regions. (ii) draw a schematic to show the changes in specific volume with temperature during cooling from the melt, comparing it to the theoretical extremes of fully crystalline and fully amorphous (indicate tm and tg)

Answers: 2

Answer

Engineering, 06.07.2019 03:10

Two slings are used to lift a girder of length l and uniform weight per unit length. what is the best position for the slings if the bending moment due to the weight of the girder is to be kept to a minimum?

Answers: 2

Answer

Engineering, 06.07.2019 03:10

Oxygen at 300 kpa and 400 k is in a closed system with an initial volume of 0.1 m3. is now compressed in a polytropic process, with exponent of n 1.2, to a temperature of 500 k. calculate: a) the boundary work done during the compression, in kj b) the heat transfer during the compression, in kj

Answers: 3

Answer

You know the right answer?

Please help Design Solution #1: Gravity Filter
Strengths for Society and Environment: Holds 1...

Questions