Engineering, 05.11.2020 19:10 ramoj0569
A. In planning the flood control system of Coyote Creek, the yearly maximum flood of the creek is of concern. Suppose that the probability of the annual maximum flood exceeding the 50-year event (E) is 0.10 in any year, what is the probability that the E flood level will be exceed in the next 5 years? Model the series of annual floods as a Bernoulli sequence. b. What is the probability that there will be at most one exceedance of event E in the next 5 years?
Answers: 3
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
Engineering, 04.07.2019 18:20
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
A. In planning the flood control system of Coyote Creek, the yearly maximum flood of the creek is of...
Mathematics, 08.10.2021 21:10
History, 08.10.2021 21:10
History, 08.10.2021 21:10
Mathematics, 08.10.2021 21:10
Mathematics, 08.10.2021 21:10
Physics, 08.10.2021 21:10
Mathematics, 08.10.2021 21:10
Social Studies, 08.10.2021 21:10
Social Studies, 08.10.2021 21:10
History, 08.10.2021 21:10
Geography, 08.10.2021 21:10