What is the metal removal rate when a 2 in-diameter hole 3.5 in deep is drilled in 1020 steel at cutting speed of 120 fpm with a feed of 0.02 ipr? What is the cutting time?

a) the metal removal rate is 14.4 in³/min

b) the cutting time is 0.98 min

Explanation:

Given the data from the question

first we find the rpm for the spindle of the drilling tool, using the equation

Ns = 12V/πD

V is the cutting speed(120 fpm) and D is the diameter of the hole( 2 in)

so we substitute

Ns = 12 × 120 / π2

Ns = 1440 / 6.2831

Ns = 229.18 rmp

Now we find the metal removal rate using the equation

MRR = (πD²/4) Fr × Ns

Fr is the feed rate( 0.02 ipr ),

so we substitute

MRR = ((π × 2²)/4) × 0.02 × 229.18

MRR = 14.3998 ≈ 14.4 in³/min

Therefore the metal removal rate is 14.4 in³/min

Next we find the allowance for approach of the tip of the drill

A = D/2

A = 2/2

= 1 in

now find the time required to drill the hole

Tm = (L + A) / (Fr × Ns)

Lis the the depth of the hole( 3.5 in)

so we substitute our values

Tm = (3.5 + 1) / (0.02 × 229.18  )

Tm = 4.5 / 4.5836

Tm = 0.98 min

Therefore the cutting time is 0.98 min

answer:

science is the study of the nature and behavior of natural things and the knowledge that we obtain about them. a science is a particular branch of science such as physics, chemistry, or biology. physics is the best example of a science which has developed strong, abstract theories.

pseudoscience is a collection of beliefs or practices mistakenly regarded as being based on scientific method.

plz rate as brainliest

the warning light flashes for a second or two when the engine starts. if it stays on, there's must be something wrong with the coolant. you should never dare to continue driving when the light is on. pull over as soon as possible and shut the engine off.

hope this is what you're talking about