subject
Engineering, 18.11.2020 17:50 nichelle2807

The gear on the right is the driving gear. If the driving gear moves at 100 RPM and the diameter of the wheel attached to the
driven gear is 2.75 in, how far in feet will the robot move in 2 minutes? How long in
seconds will it take to travel 100 feet?
Driven Gear Teeth:
Driving Gear Teeth:
Input Speed:
Gear Reduction:
Output Speed:
Distance Travelled in 1 Rotation:
Distance Travelled in 2 minutes:
How long to travel 100 feet:


The gear on the right is the driving gear.

If the driving gear moves at 100 RPM and the diameter

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
question
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
question
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
You know the right answer?
The gear on the right is the driving gear. If the driving gear moves at 100 RPM and the diameter of...
Questions
Questions on the website: 13722363