subject
Engineering, 30.11.2020 20:10 jackolantern1437

Read the excerpt from Martine’s personal narrative about receiving a birthday gift. I ripped carelessly through the wrapping paper to reveal a plain, brown box. My eyebrows raised in anticipation. What could be inside? My fingers worked more slowly now, pulling back the tape that held the box shut. As soon as the flaps sprung open, I peered inside. But I inwardly shuddered when I discovered three pairs of bright neon-green socks. Oh no, I thought. These look hideous. I would never wear something like these, but I also don’t want to hurt my aunt’s feelings. What should I do? I furrowed my brow and bit my lip, uncertain what to do next.

Which detail from the excerpt shows how the narrator feels?

peered inside
worked more slowly
flaps sprung open
furrowed my brow im timed

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
question
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
question
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
question
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
You know the right answer?
Read the excerpt from Martine’s personal narrative about receiving a birthday gift. I ripped carele...
Questions
Questions on the website: 13722363