Engineering, 08.02.2021 19:30 brianamcorchadp

Match each item with its definition below. Some answers will not be used.1. Biological evolution2. Macroevolution3. Scientific theory4. Common descent5. Homology6. Artificial selection7. Adaptations8. Diversifying selection9. Kingdom Animalia characteristics10. Kingdom Fungi characteristicsA. Mostly single-celled forms with a wide diversity of lifestyles. B. Traits that are nonfunctional. C. Traits that increase an individual's relative fitness in a particular environment. D. Organisms as disparate as trees, mold, and humans cannot have a common ancestor. E. Multicellular, rely on other organisms for food, mobile for at least part of its life cycle. F. All living beings share a common ancestor. G. Selection imposed by human choice. H. The accumulation of microevolutionary changes that results in a new species. I. Similarities between species caused by having a common ancestor. J. A statement that provides the best explanation of an observation. K. A change in the characteristics of a biological population. L. Multicellular, rely on other organisms for food, reproduce by spores, body made up of thin filaments called hyphae. M. Natural selection that favors two or more variants.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

Engineering, 04.07.2019 19:20

At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Determine the time of the day and month of the year at which the peak sensible cooling load occurs for a top floor, north-eastern corner room of an office building in durban for the following conditions: floor area: 8 x 8 x 3 m east and north walls: 115 mm face brick (outside), 20 mm air space, 115 mm ordinary brick (inside) with 15 mm plaster roof construction: suspended plasterboard ceiling, 450 mm air space, 150 mm concrete, 75mm screed, waterproofing no heat transfer across other surfaces window area 3x 1,5 m high in north wall only. ordinary glass with venetian blinds. lights and occupants : from 07: 00 to 18: 00 average light density: 25 w/m2 number of occupants : 5 seated, light office work room temperature 24°c

Answers: 3

Answer

You know the right answer?

Match each item with its definition below. Some answers will not be used.1. Biological evolution2. M...

Questions