Engineering, 16.02.2021 14:00 datgamer13
2. It is a measuring instrument used to record the amount of
electrical consumption.
A. clamp meter B. micrometer
B. micrometer
C. steel rule
D. electric meter
Answers: 2
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 19:10
How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?
Answers: 2
Engineering, 04.07.2019 19:10
What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?
Answers: 2
2. It is a measuring instrument used to record the amount of
electrical consumption.
A. clamp...
A. clamp...
World Languages, 04.08.2019 15:30
Mathematics, 04.08.2019 15:30
English, 04.08.2019 15:30
History, 04.08.2019 15:30
History, 04.08.2019 15:30
Mathematics, 04.08.2019 15:30