subject
Engineering, 05.04.2021 23:40 Nigward666

Residents of the town of Alternateville have recently complained of inconsistent shipping charges at their local Post Office. They believe the scales at the Post Office are "too inconsistent", translating to unfair charges. The weight of a parcel is measured using an electronic scale that reports the true weight plus a random fluctuation (i. e., noise) which is normally distributed with a mean of zero, and independent of parcel weight. The company that manufactures the electronic scale claims that the standard deviation of the fluctuation is 2 grams and that this fluctuation "meets the industry standard". To test the manufacturer's claim, town officials measure the weight of the same package 4 times, recording the following weights (in grams):. 101.6, 97.2, 96.3, and 103.2. 7.
(a) At the α = 5% level, is there sufficient evidence to support the residents' claim?
(a) If the officials continue their investigation, estimate the result of the next weighting of the same package with 90% confidence.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
question
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
question
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
You know the right answer?
Residents of the town of Alternateville have recently complained of inconsistent shipping charges at...
Questions
question
Mathematics, 10.05.2021 21:20
question
Biology, 10.05.2021 21:20
question
Mathematics, 10.05.2021 21:20
question
Social Studies, 10.05.2021 21:20
question
Mathematics, 10.05.2021 21:20
question
Mathematics, 10.05.2021 21:20
question
Medicine, 10.05.2021 21:20
Questions on the website: 13722361