Engineering, 19.04.2021 08:20 Theblackdot15
Express the Boolean function F= B + AB'C+ A'C in a sum of minterms fom.
Answers: 2
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?
Answers: 3
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Express the Boolean function F= B + AB'C+ A'C in a sum of minterms fom....
Computers and Technology, 13.11.2020 19:10
Social Studies, 13.11.2020 19:10
Health, 13.11.2020 19:10
Mathematics, 13.11.2020 19:10
Mathematics, 13.11.2020 19:10
Biology, 13.11.2020 19:10
History, 13.11.2020 19:10
Mathematics, 13.11.2020 19:10
Mathematics, 13.11.2020 19:10
History, 13.11.2020 19:10
Arts, 13.11.2020 19:10