A milling operation was used to remove a portion of a solid bar of square cross section. Forces of magnitude P = 18 kN are applied at the centers of the ends of the bar. Knowing that a = 30 mm and σall = 137 MPa, determine the smallest allowable depth d of the milled portion of the bar. The smallest allowable depth d of the milled portion of the bar is mm.

answer:

it thinks that you spelled something wrong.

explanation:

answer:

explain:

we don't have any choices.

answer:

understeer generally occurs when the front tyres start slipping while you go around the curve.

explanation:

hope it !

One of the benefits of working with chlorinated polyvinyl chloride (CPVC) pipe is that it can be cut with a variety of different tools that don’t require any electricity or heat. However, different cutting methods are preferred over others, depending on the application.

When cutting CPVC pipe, it is important to make a square, flat cut. An uneven cut limits the bonding area and weakens the fitting.

To help you make the best possible cut, we’ve put together the following dos and don’ts when cutting CPVC pipe in different situations.