Engineering, 15.10.2021 02:40 mommatann
Machining pattern of the bearing bore seen on bearing surface?
Answers: 2
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
Machining pattern of the bearing bore seen on bearing surface?...
Physics, 25.10.2019 15:43
Mathematics, 25.10.2019 15:43
History, 25.10.2019 15:43
Geography, 25.10.2019 15:43
Mathematics, 25.10.2019 15:43
History, 25.10.2019 15:43
Chemistry, 25.10.2019 15:43
History, 25.10.2019 15:43
Mathematics, 25.10.2019 15:43
Social Studies, 25.10.2019 15:43
Biology, 25.10.2019 15:43
Mathematics, 25.10.2019 15:43
English, 25.10.2019 15:43