Part a) A 0.50% C hypoeutectoid plain-carbon steel is slowly cooled from 940C to temperature just slightly above 727C. Calculate the weight percent austenite present in the steel Calculate the weight percent proeutectoid ferrite present in the steel Part b) A 0.50% C hypoeutectoid plain-carbon steel is slowly cooled from 940C to temperature just slightly below 727C. Calculate the weight percent eutectoid ferrite (note that you need to calculate total ferrite and subtract the proeutectoid ferrite) and the weight percent eutectoid cementite present in the steel.

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.