Engineering, 06.12.2021 18:30 drainy0uandthefish
In the 1930s, the U. S. Navy operated dirigibles. The largest was the U. S.S. Akron with a length of 785 ft and a maximum diameter of 132 ft. Its maximum speed was 84 mph (123.2 ft/sec). Moving at top speed at 10,000 ft standard atmosphere, estimate the power required in horsepower to overcome the friction drag. Disregard effects of fins and other protrusions. Assume the surface of the dirigible is smooth and the friction drag is that over a flat plate. W=
Answers: 2
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 19:10
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
Engineering, 04.07.2019 19:10
For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.
Answers: 2
Engineering, 04.07.2019 19:20
Air enters a horizontal, constant-diameter heating duct operating at steady state at 290 k, 1 bar, with a volumetric flow rate of 0.25 m°/s, and exits at 325 k, 0.95 bar. the flow area is 0.04 m2. assuming the ideal gas model with k = 1.4 for the air, determine (a) the velocity at the inlet and exit, each in m/s, and (c) the rate of heat transfer, in kw flow rate, in kg/s, (b) the mass kg 0.3
Answers: 2
In the 1930s, the U. S. Navy operated dirigibles. The largest was the U. S.S. Akron with a length of...
Computers and Technology, 28.08.2019 18:10
Biology, 28.08.2019 18:10
History, 28.08.2019 18:10
English, 28.08.2019 18:10
History, 28.08.2019 18:10
Computers and Technology, 28.08.2019 18:10
Computers and Technology, 28.08.2019 18:10