Which series of transformations will not map figure q onto itself?

a. (x + 2, y − 2), reflection over y = x − 1
b. (x − 2, y + 2), reflection over y = x + 3
c. (x + 0 y − 4), reflection over y = x − 1
d. (x − 3, y − 3), reflection over y = −x + 1

an advantage of the standard deviation is that it increases as the dispersion of the data increases. e. the interquartile range is preferred when the data are not skewed or no have outliers. an advantage of the standard deviation is that it uses all the observations in its computation.

w'x is 0.

hope it

starting with:    

5 + x - 12 = 2x - 7   

5 + x - 12 - x = 2x - 7 - x (subtract x from both sides)   

5 - 12 = x - 7 (combine and cancel x's from both sides)   

5 - 12 + 7 = x - 7 + 7 (add 7 to both sides)   

0 = x (add numbers together on both sides)       

so in order for the equation to be true, x must be 0.   

trying x = -0.5   

5 + x - 12 = 2x - 7 (original equation)   

5 + -0.5 - 12 = 2(-0.5) - 7 (plug in value of x)   

5 + -0.5 - 12 = -1 - 7 (did multiplication)   

-7.5 = -8 (did addition on both sides)       

since -7.5 is obviously not equal to -8, the value of -0.5 for x is wrong.   

trying x = 0   

5 + x - 12 = 2x - 7 (original equation)   

5 + 0 - 12 = 2(0) - 7 (plug in value of x)   

5 + 0 - 12 = 0 - 7 (did multiplication)   

-7 = -7 (did addition on both sides)       

since -7 equals -7, that demonstrates that the value of 0 for x is correct.   

trying x = 1   

5 + x - 12 = 2x - 7 (original equation)   

5 + 1 - 12 = 2(1) - 7 (plug in value of x)   

5 + 1 - 12 = 2 - 7 (did multiplication)   

-6 = -5 (did addition on both sides)       

since -6 is obviously not equal to -5, the value of 1 for x is wrong.

answer: input the dimensions of the room to be painted. click the button to calculate the amount of paint and man-hours needed for this job.

interior paint coverage depends on the brand of paint used. the coverage amount is listed on the label of the paint can. use this to adjust the values in the paint coverage section below. paint usually is applied at 350 to 400 square feet per gallon (primer at 200 to 300 square feet per gallon).

step-by-step explanation: