Mathematics, 05.09.2020 05:01 robert7248

Open the angle reflection application. Rotate the angle 90 degree counterclockwise .Then, translate it left 3 units. Finally reflect it across the y axis. What is the relationship between the original angle and the transformed angle? If you transform an angle with a sequence of reflections, rotations, or translations, is it still an angle

Answers: 1

Show answers

Another question on Mathematics

Mathematics, 21.06.2019 16:50

What is the perimeter of square abcd? units units 28 units 37 units

Answers: 2

Answer

Mathematics, 21.06.2019 18:30

Can someone check if i did this right since i really want to make sure it’s correct. if you do you so much

Answers: 1

Answer

Mathematics, 21.06.2019 18:30

Can someone me out here and the tell me the greatest common factor

Answers: 1

Answer

Mathematics, 21.06.2019 22:00

If abcde is reflected over the x-axis and then translated 3 units left, what are the new coordinates d? are he re

Answers: 1

Answer

You know the right answer?

Open the angle reflection application. Rotate the angle 90 degree counterclockwise .Then, translate...

Questions

Engineering, 26.07.2019 16:10

A100-mm-diameter cast iron shaft is acted upon by a 10 kn. m bending moment, a 8 kn. m torque, and a 150 kn axial force simultaneously. the ultimate t...

Engineering, 26.07.2019 16:10

Consider an aisi 4135 steel in which each one of its alloying elements has the average value of its range. assume that you desire the hardness for thi...

Engineering, 26.07.2019 16:10

Multi-processors computer operates in a server room in a building of weather station located in the mountains at altitude of 3000 m. the computer is c...

Engineering, 26.07.2019 16:10

Amultiple disk clutch, steel on bronze, is to transmit 4.5 hp at 710 rpm. the inner radius of contact is 1.0 in, and the outer radius of contact is 2....

Engineering, 26.07.2019 16:10

Why a single crystal material is anisotropic, but a polycrystal material is isotropic?...

Engineering, 26.07.2019 16:10

What is the effect of high oxygen content on the mechanical properties of titanium alloys?...

Engineering, 26.07.2019 16:10

Acold-drawn aisi 1015 steel tube is 300 mm od by 200 mm id and is to be subjected to an external pressure caused by a shrink fit. what maximum pressur...

Engineering, 26.07.2019 16:10

A100,000 lb elevator is supported by a stranded steel cable having a 2.5 in^2 cross-section and an effective modulus of elasticity of 12* 106 psi. as...

Engineering, 26.07.2019 16:10

Consider a large plane wall of thickness l = 0.4 m, thermal conductivity k= 2.3 w/m x °c, and surface area a= 20 m². the left side of the wall is main...

Engineering, 26.07.2019 16:10

Atransformer that is 10 cm long, 6.2 cm wide, and 5 cm high is to be cooled by attaching a 10 cm x 6.2 cm wide gold heat sink to its top surface. the...

Engineering, 26.07.2019 16:10

An incandescent lightbulb is an inexpensive but highly inefficient device that converts electrical energy into light. it converts about 10 percent of...

Engineering, 26.07.2019 16:10

Determine an equation for power of a pump that is function of specific weight of fluid , flow rate and fluid head, show detailed justification....

Engineering, 26.07.2019 16:10

Alocal dairy farmer has a water tank (much like a water tower) on her farm to hold drinking water for her dairy cows. rain water which consists of 95%...

Engineering, 26.07.2019 16:10

During a cooling process with dehumidification, where does the hot and humid air dehumidify? a)-on the cooling coils b)-on the walls of air ducts c)-...

Engineering, 26.07.2019 16:10

Asleeve bearing has an outside diameter of 1.20 in, and a length of 2 in. the wall thickness is 3/16 in. the bearing is subjected to a radial load of...

Engineering, 26.07.2019 16:10

Unlike steel martensite, formation of titanium martensite does not impart high hardness to the alloy. explain why....

Engineering, 26.07.2019 16:10

You are tasked to justify the purchase of a robot that would cost $100,000 as a fixed price, plus an additional 15% annual maintenance. this robot wil...

Engineering, 26.07.2019 16:10

Along homogeneous resistance wire of radius ro = 5 mm is being used to heat the air in a room by the passage of electric current. heat is generated in...

Engineering, 26.07.2019 16:10

Can oxygen be considered an alloying element for titanium? explain....

Engineering, 26.07.2019 16:10

Find the convection coefficient (h) associated with airflow over the surface of a thick, stainless steel casting, thermocouples are inserted into the...

More questions: Mathematics Another questions