Consider a very long rectangular fin attached to a flat surface such that the temperature at the end of the fin is essentially that of the surrounding air, i. e. 20°c. its width is 5.0cm; thickness is 1.0mm; thermal conductivity is 200w/mk; and base temperature is 40°c. the heat transfer coefficient is 20w/m^2k. estimate the fin temperature at a distance of 5.0cm from the base and the rate of heat loss from the entire fin.

An unknown substance has a melting point of 1064 ∘c, is insoluble in water, conducts electricity as a solid, and is hard. given these properties, which of the following are possible identities for the unknown substance? check all that apply. view available hint(s) check all that apply. sio2 f2 au kbr

Scientists use laser range-finding to measure the distance to the moon with great accuracy. a brief laser pulse is fired at the moon, then the time interval is measured until the "echo" is seen by a telescope. a laser beam spreads out as it travels because it diffracts through a circular exit as it leaves the laser. in order for the reflected light to be bright enough to detect, the laser spot on the moon must be no more than 1.0 km in diameter. staying within this diameter is accomplished by using a special large-diameter laser. part a if λ = 540nm , what is the minimum diameter of the circular opening from which the laser beam emerges? the earth-moon distance is 384,000 km. express your answer to two significant figures and include the appropriate units.

You are traveling in a car going at a constant speed of 100km/h down a long, straight highway. you pass another car going in the same direction which is traveling at a constant speed of 80km/h. as measured from your car's reference frame this other car is traveling at −20km/h. what is the acceleration of your car as measured from the other car's reference frame? what is the acceleration of the other car as measured from your car's reference frame?