If the cord carries current to a 100−W light bulb connected across a 120−V potential difference, what force per meter does each wire of the cord exert on the other? (Model the lamp cord as a very long straight wire.)

Water at room temperature of 20.0°c is poured into an aluminum cylinder which has graduation markings etched on the inside. the reading in the graduations is 300.0 cc. the cylinder with the water in it is then immersed in a constant temperature bath at a temperature of 100°c. what is the reading for the level of water on the graduations of the cylinder after the water and the cylinder reach thermal equilibrium with the bath? the volume coefficient of expansion of water is 2.07 x 10^-4 k-1, and the linear coefficient of expansion of aluminum is 23.0 x 10^-6 k-1. a) 305.0 cc b) 304.0 cc c) 303.5 cc d) 303.3 cc e) 304.5 cc

In the nineteenth century, gregor mendel first determined some basic rules of genetics that have been observed throughout all types of life. no observations have disproved these basic rules of genetics. charles darwin developed the idea of biological evolution around the same time, but he was unaware of mendel’s discoveries in genetics. over a century later, darwin’s idea of evolution was modified in order to incorporate mendel’s rules of genetics along with the other evidence that darwin had used. what is most likely the relationship between mendel’s rules of genetics and darwin’s idea of biological evolution? a.)mendel’s genetics states laws that are now part of the theory of biological evolution.b.)biological evolution states laws that are part of mendel’s theory of genetics.c.)mendel’s genetics replaced darwin’s entire concept of biological evolution.d.)biological evolution is a law that explains why all genetics exist.

Air enters a gas turbine with two stages of compression and two stages of expansion at 100 kpa and 17°c. this system uses a regenerator as well as reheating and intercooling – the intercooler returns the air to the inlet temperature. the pressure ratio across each compressor is 4 ; 300 kj/kg of heat are added to the air in each combustion chamber; and the regenerator operates perfectly while increasing the temperature of the cold air by 20°c. determine the system’s thermal efficiency. assume isentropic operations for all compressor and the turbine stages and use constant specific heats at room temperature. (0.378)