A mixing beater consists of three thin rods, each 10.9 cm long. The rods diverge from a central hub, separated from each other by 120°, and all turn in the same plane. A ball is attached to the end of each rod. Each ball has cross-sectional area 3.60 cm2 and is so shaped that it has a drag coefficient of 0.520. The drag force on each ball is R = 1 2 D rho A v2 where D is the drag coefficient, rho the density of the fluid, A the cross-sectional area, and v the speed of the object moving through the fluid. A) Calculate the power input required to spin the beater at 1000 rev/min in water.
B) The beater is taken out of the water and held in air. If the input power remains the same (it wouldn't, but if it did), what would be the new rotation speed?

The process in which the nucleus of an atom splits into two lighter atoms, releasing a large amount of energy is nuclear

1.in one challenge on the titan games, competitors have to lift 200 pounds up a long ramp. angel is able to move the weight in 42 seconds. anthony gets it done in only 38 seconds. which statement is true? angel has more power than anthony. angel does more work than anthony. anthony does more work than angel. anthony has more power than angel. 2.a mountain climber exerts 41,000 j of work to climb a cliff. how much power does the climber need if she wants to finish in only 500 seconds? power = work / time 20,500,000 watts 82 watts 0.0122 watts 41,500 watts 3.your family is moving to a new apartment. while lifting a box 83 joules of work is done to put the box on a truck, you exert an upward force of 75 n for 3 s. how much power is required to do this? (hint: you only need two of the 3 numbers given! ) power = work / time 249 watts 25 watts 2075 watts 27.7 watts

The a992 steel rod bc has a diameter of 50 mm and is used as a strut to support the beam. determine the maximum intensity w of the uniform distributed load that can be applied to the beam without risk of causing the strut to buckle. take f.s. = 2 against bucklin