Physics, 31.03.2020 20:32 trimommalone353

PLEASE HELP ASAP.

1. A series circuit contains an electric generator, three devices operated by electricity, and the necessary connecting wires. The resistances of the three devices are 20 ohms, 8 ohms, and 4 ohms. The resistance of the connecting wires can be neglected. What is the total resistance in the circuit?

2. If the terminal voltage developed by the generator in question 1 is 110 V and the resistance of the generator is neglected, what current will flow through the circuit? Round your answer to two decimal places.

3. For the conditions described in questions 1 and 2, what will be the voltage drop in the device having a resistance of 8 ohms? Round your answer to one decimal place.

4. If the three electrical devices in question 1 are connected in parallel, as shown in the figure, what will be the total resistance of the group of devices? Round your answer to two decimal places.

5. Assume that the voltage developed by the generator in the circuit in question 4 is 110 V. If the resistance of the generator and the connecting wires is neglected, what current will flow through the wires between the generator and the group of three devices? Round your answer to one decimal place.

6. In the circuit in question 4, what portion of the total current will flow through the device that has a resistance of 8 ohms?

Answers: 3

Show answers

Answers

Answer from: jennarosebrand3518

1) $32 \Omega$

2) 3.44 A

3) 27.5 V

4) $2.35\Omega$

5) 46.8 A

6) 13.7 A

Explanation:

Resistors are said to be connected in series if they are connected along the same branch. In this case, the total resistance of the circuit is equal to the sum of the individual resistances:

R=R_1+R_2+...+R_n

In this case, we have three resistances connected in series, so the total resistance of the circuit will be:

R=R_1+R_2+R_3

where:

$R_1=20\Omega$ is the resistance of the 1st device

$R_2=8 \Omega$ is the resistance of the 2nd device

$R_3=4\Omega$ is the resistance of the 3rd device

Therefore, the total resistance is:

$R=20+8+4=32 \Omega$

Here we want to find the current in the circuit.

First of all, we are told that the resistance of the generator is neglected: this means that the total resistance of the circuit is that found in part 1).

Therefore, we can find the current using Ohm's Law:

V=RI

where

V is the terminal voltage of the battery

R is the total resistance of the circuit

I is the current in the circuit

In this problem, we have:

V = 110 V is the voltage of the battery

$R=32\Omega$ is the total resistance of the circuit

So the current is

$I=\frac{V}{R}=\frac{110}{32}=3.44 A$

The voltage drop across a certain resistor is given again by Ohm's Law:

V_i = R_i I_i

where

V_i is the voltage drop across the resistor

R_i is the resistance of the resistor

I_i is the current through the resistor

In this problem:

$R_2=8 \Omega$ is the resistor we are considering

I_2=3.44 A is the current through the resistor (in a series circuit, the current is the same for all devices in the circuit)

So, the voltage drop is

V_2=I_2 R_2 =(3.44)(8)=27.5 V

Electrical devices are said to be connected in parallel if they are connected along different branches having same terminal points, so that they have same potential difference across them.

The total resistance for resistors in parallel is given by:

$\frac{1}{R}=\frac{1}{R_1}+\frac{1}{R_2}+....+\frac{1}{R_n}$

In this problem we have 3 resistors, so the total resistance is:

$\frac{1}{R}=\frac{1}{R_1}+\frac{1}{R_2}+\frac{1}{R_3}$

where

$R_1=20\Omega$ is the resistance of the 1st device

$R_2=8 \Omega$ is the resistance of the 2nd device

$R_3=4\Omega$ is the resistance of the 3rd device

Therefore, the total resistance is:

$\frac{1}{R}=\frac{1}{20}+\frac{1}{8}+\frac{1}{4}=0.425\\R=\frac{1}{0.425}=2.35\Omega$

To find the total current in the circuit, we can use again Ohm's Law:

V=RI

where:

V is the terminal voltage of the battery

R is the total resistance of the circuit

I is the current in the circuit

In this problem, we have:

V = 110 V is the voltage of the battery

$R=2.35\Omega$ is the total resistance of the circuit

Therefore, solving for I, we find the current:

$I=\frac{V}{R}=\frac{110}{2.35}=46.8 A$

The current across a certain resistor can be found using Ohm's Law, as before:

V_i = R_i I_i

where:

V_i is the voltage drop across the resistor

R_i is the resistance of the resistor

I_i is the current through the resistor

In this problem:

$R_2=8 \Omega$ is the resistor we are considering

V_2=110 V is the voltage drop across that resistor (in a parallel circuit, the voltage drop is the same across each resistor)

Solving for I, we find the current through it:

$I_2=\frac{V_2}{R_2}=\frac{110}{8}=13.7 A$

Answer from: Quest

Wavelength divides in half and speed stays the same.

Answer from: Quest

It maybe because uranus is made of gas but uranus has a solid core in the middle

Another question on Physics

Physics, 22.06.2019 01:00

An incident ray through the focal point of a spherical mirror will: reflect through the center of curvature. reflect back through the focal point. reflect parallel to the principle axis. reflect the same direction as the incident ray.

Answers: 1

Answer

Physics, 22.06.2019 12:00

You have a resistor and a capacitor of unknown values. first, you charge the capacitor and discharge it through the resistor. by monitoring the capacitor voltage on an oscilloscope, you see that the voltage decays to half its initial value in 2.70 miss . you then use the resistor and capacitor to make a low-pass filter. what is the crossover frequency fc?

Answers: 2

Answer

Physics, 22.06.2019 14:10

The number of passengers who arrive at the platform of a subway station for the 10 am train is a random variable with a mean of 120 and a variance of 16. find the lower bound of the probability that there will be between 100 and 140 passengers (round off to second decimal place).

Answers: 3

Answer

Physics, 22.06.2019 19:20

Aproduction line at v. j. sugumaran's machine shop has three stations. the first station can process a unit in 7 minutes. the second station has two identical machines, each of which can process a unit in 16 minutes (each unit only needs to be processed on one of the two machines). the third station can process a unit in 10 minutes. ▼ is the bottleneck station, with a bottleneck time of nothing minutes per unit (enter your response as a whole number).

Answers: 3

Answer

You know the right answer?

PLEASE HELP ASAP.

1. A series circuit contains an electric generator, three devices ope...

Questions