Physics, 16.04.2020 19:23 tshegofatso92
Spot welding is used to fuse two sheets of metal together at one small spot. Two copper electrodes pinch the sheets together at a point and then run a huge electric current through that point. The two sheets melt and flow together to form a spot weld. Why does this technique work only with relatively poor conductors of electricity such as stainless steel and not with excellent conductors such as copper?
Answers: 3
Physics, 22.06.2019 06:50
Much of the information taught in earth-space science would not be available if it weren’t for our remote sensing abilities. explain two ways our remote sensing strategies contribute to our knowledge of these topics.
Answers: 3
Physics, 22.06.2019 12:00
Asolid round steel rod 6.25 mm in diameter and 375 mm long is rigidly bonded to the end of solid square brass rod 25 mm on a side and 300 mm long. the geometric axes of the bare are along the same line. an axial tensile force of 5.4 kn is applied at the extreme ends of the assembly. for steel e = 200 gpa and for brass e = 90 gpa. determine the total elongation for the assembly.
Answers: 1
Physics, 22.06.2019 13:40
An ideal otto cycle has a compression ratio of 10.5, takes in air at 90 kpa and 40°c, and is repeated 2500 times per minute. using constant specific heats at room temperature, determine the thermal efficiency of this cycle and the rate of heat input if the cycle is to produce 90 kw of power.
Answers: 2
Spot welding is used to fuse two sheets of metal together at one small spot. Two copper electrodes p...
Computers and Technology, 24.02.2020 18:25
English, 24.02.2020 18:25
History, 24.02.2020 18:25
Mathematics, 24.02.2020 18:25
Mathematics, 24.02.2020 18:25
Mathematics, 24.02.2020 18:25
Computers and Technology, 24.02.2020 18:25