Oil is a powerful source of energy used for cars, machines, and many other purposes. While studying sources of energy that could replace the use of oil, a student thinks about solar power, wind power, nuclear power, and electric batteries. The students asks,"Which type of source will waste the least energy and provide the most energy in all situations?" Which best describes why a scientist would ask a different question than this one?

A- The question asks about subjective personal preferences regarding energy.
B- The question focuses on the objective measurements of amounts of energy.
C- The question has too wide of a focus, as though all situations can be studied at once.
D- The question is focused on the future and finding new answers about changing needs.

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

the right answer is 0.3 meters per second