A cylindrical rod of brass originally 16.0 mm in diameter is to be cold worked by drawing; the circular cross section will be maintained during deformation. A cold-worked yield strength in excess of 350 MPa and a ductility of at least 20%EL are desired. Furthermore, the final diameter must be 11.3 mm. Explain how this may be accomplished.

0.3x0.21x0.08kg=mass 1 sheet

mass 500 = 500xmass 1

volume pile = 0.3x0.2x0.048

density=mass/volume= 500xmass 1/0.3x0.2x0.048

v patient student

  1.the balanced   chemical equation is as below

cu +   2 ag(no)₃ → cu(no₃)₂   +2 ag

2.the   much silver   produced   is   50.9 g

step 1: find the   moles of cu

moles =   mass÷   molar mass

  from periodic table the molar mass of cu = 63.5 g/mol

moles is therefore = 15.00 g÷ 63.5 g/mol = 0.236   moles

step 2: use the mole ratio to determine the   moles of ag

from equation above   cu: ag   is 1: 2

therefore the moles of ag   =0.236   moles   x 2/1 =0.472   moles

step 3: find the mass   of ag

mass = moles x molar mass

from periodic table   the molar mass of ag =107.87 g/mol

mass   = 0.472   moles x 107.87 g/mol = 50.9 g

3.   the   much   silver   collected worth is   1.797 oz

  convert   50.9 g   to oz

that is   1 gram = 0.0353 oz

          50.9 grams =?   oz

by cross multiplication

={(50.9 grams x 0.0353 oz) / 1   gram}   =1.797 oz

the answer is f1 and d2 because if you put equal force on those two points the beam would balance trust me on this