Physics, 04.12.2020 23:30 amandavertre

A fan cart with the fan set to High rolled across a floor. The cart's speeds are shown below. If the fan were set to Medium instead, what could the cart's speed be at 5 seconds? A. 10.9 cm per second
B. 31.0 cm per second
C. 40.1 cm per second
D. 48.3 cm per second
Correct A - 10.9 cm per second
Explanation: The fan supplies a force to the cart. If a lower fan speed were used, less force would be applied. This would cause a slower change in the cart's speed. So, the cart would be rolling more slowly than 31.0 cm per second after 5 seconds. The only choice that is less than 31.0 cm per second is 10.9 cm per second.

Force is needed
A. for a moving object to keep moving at the same speed and direction
B. for a moving object to change its speed
C. for a motionless object to remain still
D. to prevent a moving object from turning
Correct B - for a moving object to change its speed
Explanation: An object will change its speed only if a force acts on it. In the Gizmo, forces can speed the cart up (fan) or slow the cart down (friction). Answer choice A is incorrect because a moving object will keep moving at the same speed if there is no force acting on it (like the cart after the fan was turned off). Answer choice C is incorrect because no force is required for a motionless object to remain at rest. Answer choice D is not correct because a moving object will naturally move in a straight line if there is no force.

Rebecca puts her backpack on a fan cart and turns the fan on. She then measures the speed each second afterward. At 10 seconds the cart has a speed of 20 cm per second. How fast will the cart be moving at 12 seconds?
A. 18 cm per second
B. 20 cm per second
C. 22 cm per secnod
D. 24 cm per second
Correct D - 24 cm per second
Explanation: The cart started at 0 cm per second. Ten seconds later it was moving 20 cm per second. Therefore, every second the cart is gaining 2 cm per second. So, after 11 seconds the speed will be 22 cm per second. After 12 seconds the speed will be 24 cm per second.

A fan cart is moving forward on a frictionless surface. If you change the fan speed from High to Low, what will occur?
A. The cart will stop moving.
B. The cart will slow down.
C. The cart will keep moving at the same speed.
D. The cart will continue to speed up, but not as quickly as before.
Correct D - The cart will continue to speed up, but not as quickly as before.
Explanation: The cart will continue to speed up because there is still force acting on it. However, less force is acting on it now because the fan speed is lower.

The speed-versus-time bar graph for a fan cart experiment is shown below. What could have happened?
A. The track was frictionless, and the fan was changed from High to Low after 8 seconds.
B. The track was frictionless, and the fan was changed from High to Off after 8 seconds.
C. The track was wooden, and the fan was changed from High to Off after 8 seconds.
D. The track was wooden, and the fan was changed from Off to Low after 8 seconds.
Correct B - The track was frictionless, and the fan was changed from High to Off after 8 seconds.
Explanation: The bar graph shows that the speed stayed the same after 8 seconds. This means there is no total force on the cart. This matches the situation in which the fan is off and the surface is frictionless.

Answers: 1

Show answers

Another question on Physics

Physics, 21.06.2019 17:30

Abatter hits the baseball a with an initial velocity of v0 = 110 ft/sec directly toward fielder b at an angle of 23° to the horizontal; the initial position of the ball is 2.2 ft above ground level. fielder b requires 0.44 sec to judge where the ball should be caught and begins moving to that position with constant speed. because of great experience, fielder b chooses his running speed so that he arrives at the “catch position” simultaneously with the baseball. the catch position is the field location at which the ball altitude is 8.4 ft. determine the velocity of the ball relative to the fielder at the instant the catch is made.

Answers: 1

Answer

Physics, 22.06.2019 05:40

An ideal polarizer with its transmission axis rotated 30 degrees to the vertical is placed in a beam of unpolarized light of intensity 10w/m^2. after passing through the polarizer, what is the intensity of the beam? a. 8.7 w/m^2 b. 7.5 w/m^2 c. 5.0 w/m^2 d. 10 w/m^2 e. 2.5 w/m^2

Answers: 1

Answer

Physics, 22.06.2019 06:30

The coulomb's law explains which of the following? select all the force between two charged objects is inversely proportional to the charge on each object. the force between two charged objects is directly proportional to the charge on each object. the force between two charged objects is directly proportional to the distance separating them. the force between two charged objects is inversely proportional to the square of the distance separat coulomb's law is similar to newton's 2nd law. if the force between two objects is f and the charge on both objects is doubled, the new force between the would now be 2f. if the force between two objects is 2f and the distance separating them is doubled, the new force between the objects would now o the be zf.

Answers: 3

Answer

Physics, 22.06.2019 10:40

As you are trying to move a heavy box of mass m, you realize that it is too heavy for you to lift by yourself. there is no one around to , so you attach an ideal pulley to the box and a massless rope to the ceiling, which you wrap around the pulley. you pull up on the rope to lift the box. use g for the magnitude of the acceleration due to gravity and neglect friction forces. once you have pulled hard enough to start the box moving upward, what is the magnitude f of the upward force you must apply to the rope to start raising the box with constant velocity? express the magnitude of the force in terms of m, the mass of the box.

Answers: 1

Answer

You know the right answer?

A fan cart with the fan set to High rolled across a floor. The cart's speeds are shown below. If the...

Questions