Physics, 24.03.2021 09:50 fredvales19

Brick falls from a height of 10 m. Calculate the time taken for the brick to reach the ground.

Answers: 2

Show answers

Another question on Physics

Physics, 22.06.2019 11:50

The mass of the sun is 1.99×1030kg and its distance to the earth is 1.50×1011m. what is the gravitational force of the sun on the earth?

Answers: 3

Answer

Physics, 22.06.2019 12:10

The average density of the planet uranus is 1.27 103 kg/m3. the ratio of the mass of neptune to that of uranus is 1.19. the ratio of the radius of neptune to that of uranus is 0.969. find the average density of neptune.

Answers: 1

Answer

Physics, 23.06.2019 01:00

What electron configurations do atoms usually achieve by sharing electrons to form covalent bonds?

Answers: 3

Answer

Physics, 23.06.2019 02:30

Why are nonmetals more likely to react with eachother by sharing electrons

Answers: 3

Answer

You know the right answer?

Brick falls from a height of 10 m. Calculate the time taken for the brick to reach the ground....

Questions

Mathematics, 29.09.2019 01:10

The formula for centripetal acceleration, a, is given by this formula, where v is the velocity of the object and r is the objects distance from the ce...

Business, 29.09.2019 01:10

Acompany deposits and stores its cash in a bank which internal control principles are evident in this procedure...

Biology, 29.09.2019 01:10

Use the following excerpts from students letters to determine in which biome each student is living....

History, 29.09.2019 01:10

Which statement about ancient greece is an opinion rather than a fact?...

English, 29.09.2019 01:10

Name some cons about over fishing ....

Engineering, 29.09.2019 01:10

Aface milling operation is to be performed on cast iron. tool diameter is 5 inches, w = 2 inches, part length = 8 inches, depth of cut = 0.012 inches,...

Engineering, 29.09.2019 01:10

A2.3-in-diameter steel rod 3 ft long is used between two immovable (rigid) walls. the rod is welded to the two walls at each of its two ends. the ambi...

Engineering, 29.09.2019 01:10

Alow-speed cessna 150 flying at 5,000 ft pressure altitude has an indicated airspeed of 250 ft/s. if the outside temperature is 30°f and there is a 50...

Engineering, 29.09.2019 01:10

Electric power is to be generated by installing a hydraulic turbine-generator at a site 120 m below the free surface of a large water reservoir that c...

Engineering, 29.09.2019 01:10

A0.66 ft steel bar undergoes a stretch of 0.75 in in an axial direction. what is the strain? use three significant figures (four if your the first no...

Engineering, 29.09.2019 01:10

Calculate the local reynolds number at a point 0.1 ft aft of the leading edge of a wing, which is being tested at sea level, standard day conditions,...

Engineering, 29.09.2019 01:10

Ametallic rod with a diameter of 2.8 in and a modulus of 31.2 x 10^6 psi is elastically deformed to a tensile strain of 2.80 x 10^-3 in/in. calculate...

Engineering, 29.09.2019 01:10

Aboiler is operating at a pressure of 7,000kpa and steam outlet temperature is 600c, what is the heat per kilogram of steam required to convert the wa...

Engineering, 29.09.2019 01:10

Determine displacement (in) of a 1.28 in diameter steel bar, which is 50 ft long under a force of 21,672 lb if elasticity modulus is 30 x 10^6 psi. ma...

Engineering, 29.09.2019 01:10

A10.2 mm diameter steel circular rod is subjected to a tensile load that reduces its cross- sectional area to 52.7 mm^2. determine rod's percent ducti...

Engineering, 29.09.2019 01:10

If the bending moment (m) is 4,176 ft-lb and the beam is an 1 beam, calculate the bending stress (psi) developed at a point with a distance of c = 3.9...

Engineering, 29.09.2019 01:10

Find the stress (psi) in a rod with a 0.68 in diameter caused by a 528 lb axial load....

Engineering, 29.09.2019 01:10

Aspark ignition engine is to be modeled using fluid, air, is at 95 kpa and 290 k before compression. the compression ratio is 9 and the maximum temper...

Engineering, 29.09.2019 01:10

Technican a says that the transmission hydraulic pump operates only when the vehicle is in motion. technician b says that the transmission hydraulic p...

History, 29.09.2019 01:10

The idea within the work place of "let those fist to survive, survive," and if the employee gets hurt it is their fault and not their working conditio...

More questions: Physics Another questions

Brick falls from a height of 10 m. Calculate the time taken for the brick to reach the ground.​

Answers

Another question on Physics

Brick falls from a height of 10 m. Calculate the time taken for the brick to reach the ground.