subject
Physics, 27.04.2021 15:40 gilbertej437

A 700-gram grinding wheel 22.0 cm in diameter is in the shape of a uniform solid disk. (We can ignore the small hole at the center.) When it is in use, it turns at a constant 215 rpm about an axle perpendicular to its face through its center. When the power switch is turned off, you observe that the wheel stops in 50.0 s with constant angular acceleration due to friction at the axle. What torque does friction exert while this wheel is slowing down?

ansver
Answers: 3

Another question on Physics

question
Physics, 21.06.2019 18:30
If a textbook weighs 37.2 n on venus, and the book has a mass of 4.4 kg, what is the strength of gravity on venus? 8.9 m/s28.9 m/si don't have enough information,9.8 m/s2
Answers: 1
question
Physics, 21.06.2019 20:40
In a steady-flow steam power plant system, two adiabatic high-pressure and low-pressure turbines ane used to generate power. superheated steam enters the high-pressure turbine at 8 mpa and 550°c. the steam expands in the high-pressure turbine to a saturated vapor at 3 mpa. in order to increase the powe generation of the power plant, another steam turbine working in a lower pressure ranges is deployed. the outlet vapor from the first turbine is heated up at a boiler to the temperature of 500 c at the constant pressure of first turbine's outlet (3 mpa). then, the vapor enters the second turbine and produces extra work. the exit conditions of the second turbine are 5o kpa and 90 percent quality. if the total power output of the power plant is 25 mw, determine a) the mass flow rate of the water (kg/s). b) heat transfer rate in the boiler (mw). (30 points) 3 mpa 00 c 8 mpa s0 c high pres turbine low pres boiler turbine 50 kpa 3 mpa 09 saturated vapor t heat engine, shown in the figure, operates between high temperature and low temperature of through a heat 4. a carnot tn and tu respectively. this heat engine receives energy from a heat reservoir at t exchanger where the heat transferred is proportional to the temperature difference as ? = k (z,-7, ). it rejects heat at a given low temperature tl. to design the heat engine for maximum work output, find the high temperature, th, as a function of tes and t. (15 points) qe
Answers: 3
question
Physics, 21.06.2019 22:10
The consumption of fossil fuels could be
Answers: 2
question
Physics, 22.06.2019 20:40
Abasketball star covers 2.65 m horizontally in a jump to dunk the ball. his motion through space can be modeled precisely as that of a particle at his center of mass. his center of mass is at elevation 1.02 m when he leaves the floor. it reaches a maximum height of 1.90 m above the floor and is at elevation 0.910 m when he touches down again. (a) determine his time of flight (his "hang time"). (b) determine his horizontal velocity at the instant of takeoff. (c) determine his vertical velocity at the instant of takeoff. (d) determine his takeoff angle. (e) for comparison, determine the hang time of a whitetail deer making a jump with center-of-mass elevations yi = 1.20 m, ymax = 2.45 m, and yf = 0.750 m.
Answers: 1
You know the right answer?
A 700-gram grinding wheel 22.0 cm in diameter is in the shape of a uniform solid disk. (We can ignor...
Questions
question
Mathematics, 30.09.2021 03:10
question
Mathematics, 30.09.2021 03:10
question
Mathematics, 30.09.2021 03:10
Questions on the website: 13722360