Engineering, 11.07.2019 04:10 spearjj
Acontainer filled with a sample of an ideal gas at the pressure of 150 kpa. the gas is compressed isothermally to one-third of its original volume. what is the new pressure of the gas a)-900 kpa b)- 300 kpa c)- 450 kpa d)- 600 kpa
Answers: 1
(At constant temperature and number of moles)
= initial pressure of gas = 150 kPa
= final pressure of gas = ?
= initial volume of gas = v L
= final volume of gas = 
Another question on Engineering
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
Engineering, 06.07.2019 02:30
A75mm diameter shaft is supported in a journal bearing 75mm long with a diametral clearance of 0. 1mm. it supports a radial load of 1000 n and is lubricated with sae 50 oil at 70°c. find the friction torque and the power loss when the crankshaft rotates at 2900 rev/min.
Answers: 1
You know the right answer?
Acontainer filled with a sample of an ideal gas at the pressure of 150 kpa. the gas is compressed is...
Questions
Computers and Technology, 05.09.2019 23:10
Computers and Technology, 05.09.2019 23:10
