Engineering, 22.02.2021 18:40 Smitheyyy973

MN Chemicals desires to run the following gas phase reaction in an isothermal, isobaric (25 deg C, 101 kPa) reactor: A(g) + 2B(g) â†’ C(g, 1) + D(g)

It is determined that the rate law can be expressed as first order in both reactants. The saturation mole fraction of C in the gas phase is 0.25. Assume that A and B are fed at a stoichiometric ratio and the total volumetric flow rate is 1.5 L/min. The rate constant is 0.035 L/(mol's). Assume that all gaseous species behave as ideal gases.

Required:
a. Is this an elementary reaction/step?
b. Write out the stoichiometric table in terms of Xa and Fao for all species.
c. What is the vapor pressure of C? At what conversion of A does condensation of C begin?
d. Write (-rA) both before and after condensation as a function of conversion, the rate constant, and the initial concentration of A.
e. What volume of CSTR is required if you desire a conversion of 90% of A?

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

Answer

You know the right answer?

MN Chemicals desires to run the following gas phase reaction in an isothermal, isobaric (25 deg C, 1...

Questions