Mathematics, 27.06.2019 07:00 darkpain8913

Aline has a slope of 1/4 and passes through point (0.4,-1/2) . what is the value of the y-intercept. a.) -0.6 b.) -0.4 c.) 0.275 d.) 0.525

Answers: 2

Show answers

Another question on Mathematics

Mathematics, 21.06.2019 16:00

What is the length of the unknown leg in the right triangle ?

Answers: 2

Answer

Mathematics, 21.06.2019 18:30

1.two more than the quotient of a number and 6 is equal to 7 use the c for the unknown number translate the sentence into an equation

Answers: 1

Answer

Mathematics, 21.06.2019 18:50

Question b of 10which of the following describe an angle with a vertex at a? check all that applyo a. labcов. савd dooo c_baco d. zacb

Answers: 1

Answer

Mathematics, 22.06.2019 03:00

Which of the following statements must be true about this diagram? check all that apply. x°, y°, z°, & w°

Answers: 3

Answer

You know the right answer?

Aline has a slope of 1/4 and passes through point (0.4,-1/2) . what is the value of the y-intercept....

Questions

Engineering, 26.07.2019 17:20

Determine the power required for a 2500-kg car to climb a 200-m long uphill road with a slope of 30° in 8s, if the car a)-travels at constant velocity...

Engineering, 26.07.2019 17:20

Air is at 100 kpa and 150°c, and undergoes a constant pressure process. the final temperature of the air is 1000°c. a) compute the specific volume rat...

Engineering, 26.07.2019 17:20

What is the max speed that may be achieved over a distance of 60 m by a car starting from rest, if the coefficient of static friction is 0.70 between...

Engineering, 26.07.2019 17:20

Acylindrical tank filled with a fluid has a diameter of one meter and a length of 1.5 meters. t weighs 6000 n, where the gravitational acceleration is...

Engineering, 26.07.2019 17:20

Arigid tank contains water vapor at 300° c and an unknown pressure. the vapor starts condensing. the cooling continues until all vapors have path and...

Engineering, 26.07.2019 17:20

Which of the following characterizes a un-cold-worked steel in comparison with a cold-worked steel? i. higher yield strength ii. better surface smoot...

Engineering, 26.07.2019 17:20

If the turbulent velocity profile in a pipe 0.6 m in diameter may be approximated by -3.56y1/7 where v is in m/s and y is in m, and the shearing stres...

Engineering, 26.07.2019 17:20

Afixture will be designed to hold a part in a vise that will be produced in mass quantities. the rner closest to the mill oper a suitable fixture. the...

Engineering, 26.07.2019 17:20

The principle for strengthening metals/alloys is creating barriers to dislocation motion in their microstructures. then, what are the barriers to disl...

Engineering, 26.07.2019 17:20

What does the charpy test determine? (a) yield strength (b) fracture strength (c) young's modulus toughness e) ductility...

Engineering, 26.07.2019 17:20

Which of the following is the primary factor in determining if a sheet metal can be bent and formed into another shape without experiencing fracture a...

Engineering, 26.07.2019 17:20

Steam expands in a turbine from 6 mpa, 500°c and 80 m/s to 0.2 mpa, 150°c and 140 m/s at a rate of 1.2 kg/s. heat is lost from the turbine at a rate o...

Engineering, 26.07.2019 17:20

What are the four types of defects in crystalline metal materials?...

Engineering, 26.07.2019 17:20

Find the contact ratio for a pair of spur gears with a center distance of 4.125 in. if the gears have 19 and 80 teeth respectively and a normal pressu...

Engineering, 26.07.2019 17:20

Acompound tube is made by shrinking one steel tube onto another. the dimensions of the assembly are 200 mm internal diameter, 325 mm at the common int...

Engineering, 26.07.2019 17:20

Crude oil at 20°c fills the space between two concentric cylinders 250 mm high and with diameters of 150 mm and 156 mm. what torque is required to rot...

Engineering, 26.07.2019 17:20

For each quantity listed below, indicate it units using m (kg), l (m), t (s) and t (k) as basic dimensions. (a) power (b) pressure (c) modulus of elas...

Engineering, 26.07.2019 17:20

An fcc iron-carbon alloy initially containing 0.55 wt% c is exposed to an oxygen-rich and virtually carbon-free atmosphere at 1325 k (1052 c). under t...

Engineering, 26.07.2019 17:20

What is the ratio between the viscosities of air and water at 10°c? what is the ratio between their kinematic viscosities at this temperature?...

Engineering, 26.07.2019 17:20

Interstage cooling is used to reduce the compression work required in a multistage compressor of a helium cooled nuclear reactor. in one such cooler,...

More questions: Mathematics Another questions