6. Explain Why does coating surfaces with oil reduce friction
between the surfaces?

This question is worth 54 points ! rock falls from a ledge to the ground what energy conversion occurs during this process a potential to kinetic b kinetic to potential c thermal to mechanical d chemical to mechanical

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

The man of mass m1 and the woman of mass m2 are standing on opposite ends of the platform of mass m0 which moves with negligible friction and is initially at rest with s = 0. the man and woman begin to approach each other. derive an expression for the displacement s of the platform when the two meet in terms of the displacement x1 of the man relative to the platform.